Kukko K-70-C PULLPO Grooved Ball Bearing Puller Set (10mm - 100mm ID)

Highlights:

• Made In Germany.
• This set is a combination of the K-70-A and K-70-B sets.
• PULLPO: The special cross-beam shape enables safe and easy mounting and automatic clamping of the jaws via leverage transmission.
  

The Kukko PULLPO 10mm - 100mm ID Grooved Ball Bearing Puller Set is will remove most grooved ball bearings. You won't need to dismantle the shaft, and it will highly reduce the chance of causing damage.

Features:

• With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed.
• Puller is self-tensioning and easy to handle.
• Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.
• Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.
• The proven KUKKO claw in a newly developed, modern jaw design.
• The two pulling jaw versions are color-coded for easier distinction.
• The pulling jaws are tempered for a long service life.
• The special cross-beam design ensures secure retention of the the part to be removed by the pulling jaws thanks to the spread adjuster.
• Mechanical pressure spindle.
• Rounded spindle head is used with the slide hammer as a spindle top.
• Milled thread treated with special coating.
• Instructions and conversion table in the cover.
• Secure storage in special foam.

Kukko Advantage:

• Puller is self-tensioning and easy to handle.
• Simple, self-explanatory use with a small number of individual components.
• Simple mounting of the pulling jaws with 90° rotation in the cross-beam.
• Secure, form-fitting connection of the pulling jaws with the cross-beam.
• Only two pulling jaw types required.
• Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.
• Magnets under the cross-beam ensure simple mounting of the support rings on the ball bearing.
• Spindle head band prevents the wrench from slipping off.
• Non-contact removal possible - in combination with a slide hammer.

Specs:

• Ball bearing ISO: 6000-6020; 6200-6212; 6300-6311; 6403-6408
• Inner diameter of ball bearing: 10 - 100 mm (3/8 - 3 7/8 inch)
• Outer diameter of ball bearing: 26 - 150 mm (1 1/32 - 5 7/8 inch)
• Hexagon drive (male): 13; 17 mm
• K-70 jaw length: 70; 156 mm (2 3/4; 6 3/16 inch)
• Number of rings: 13 St. / pcs.
  
• Number of jaws: 14
  
• Diameter of support ring: 19 - 77,5 mm (3/4 - 3 1/16 inch)
• Counter-pressure pad for extraction of ball bearing with hollow shaft: 10 - 42 mm (3/8 - 1 5/8 inch)
• Number of counter-pressure pads: 4 St. / pcs.
  
• Diameter of counter-pressure pads: 35 - 80 mm (1 3/8 - 3 3/16 inch)
• Weight 7.125 kg

What's included: (SKU and Item Name)

• 70-01-T Cross-beam
• 70-02-T Cross-beam
• 70-011 3 narrow replacement jaws without rings
• 70-012 3 wide replacement jaws without rings
• 70-021 4 narrow replacement jaws without rings
• 70-022 4 wide replacement jaws without rings
• 610120 Spindle
• 614242 Spindle
• 70-01-R Complete ring set
• 70-02-R Complete ring set
• 700117 Small pressure pads
• 700217 Large pressure pads
• 70-021-S 4 narrow replacement jaws with rings (red)

Videos:

K-70-C Ball Bearing Puller Set - Unboxing and Usage

Downloads:

Download the Kukko K-70-C data sheet here.