Vehicle Maintenance
Filters
- AUTOplus4 & AUTOplus5 Accessory (1)
- AUTOplus 5 Accessory (8)
- Ball joint press (3)
- Band Wrench (1)
- Bearing Splitter (2)
- Diagnostic Scanners (13)
- Diagnostic Tool (2)
- Diesel Tools (3)
- EGA1 Accessory (3)
- EGA5 & EGA1 Accessory (5)
- EGA5, EGA1, & AUTOplus5 Accessory (10)
- EGA5 Accessory (2)
- Exhaust Gas Analyzer (8)
- Fluid Extractor (1)
- Fuel Injector Puller (1)
- Gear Puller (2)
- Motorcycle / Powersports Scanner (15)
- Slide Hammer Puller (1)
- Strut Spreader Tool (2)
- Stud Extractor (6)
- Suspension Tool (1)
- Valve Synchronization (1)
- Vehicle Pressure Tester (1)
- Vehicle Pressure Tester Accessory (3)
- Video Scope (6)
- Wrench Set (1)
Hubitools Common Rail Caps Set for HU35026 and HU35025.
HubitoolsFeatures: This set will allow the technician to close injectors fuel inlet directly on the common rail. The purpose of this operation is to identi...
View full detailsHubitools Automotive Sensor Simulator And Wiring Tester
HubitoolsFeatures: Simulate & actuate the output signal from automotive sensors: frequency, voltage, and test sequences. Simulate most sensors, injecto...
View full detailsHubitools Scope+ Automotive Electrical Circuit Troubleshooter Meter
HubitoolsFeatures: NOTE: The SCOPE+ has a new design! The features / functions are the same. Also, we kept some of the older pictures so you can reference ...
View full detailsKane IRP3 Infra Red Thermal Printer.
KaneThe Kane IRP3 Infra Red Thermal Printer works with the Kane EGA5, EGA5/PR, EGA1NO, EGA1HR and the AUTOplus5.
Kane 5-Gas Automotive Diagnostic Exhaust Gas Analyzer
KaneFeatures: Tests HC, O2, CO, CO2, NOX and Lambda. Readings are LIVE. (except NOx and LAMBDA which are calculated). Detect problems too marginal to...
View full detailsKane Nitrogen Oxides NOx Vehicle Emissions Gas Analyzer
KaneHighlights: Single gas analyzer. Measures NOx (nitrogen oxides), 0-600ppm Great for testing diesel engine NOx emissions. Measures true outlet NOx ...
View full detailsKane Carbon Monoxide CO High Range Vehicle Emissions Gas Analyzer
KaneHighlights: Measures CO (Carbon Monoxide), 0-10% / 100,000ppm Tests engine CO emissions. Vehicles without catalytic converters can be tuned for op...
View full detailsMemoBike 6050 For ATV UTV Diagnostic Tuning Scan Tool (With 10 Cables)
ANSEDImportant: The Ansed Motorscan MS6050R17 is now the MemoBike 6050 (model MS6050R23). Most features are the same PLUS the MemoBike 6050 includes un...
View full detailsANSED Printer Paper Roll For The AUTOplus 5 (5 rolls)
AnsedPrinter Roll (1 pack of 5 rolls) for the KMIRP2-BLU Thermal Printer. Compatible with the AnsedAUTOplus5 Exhaust Gas Analyzer. Need more info? Pleas...
View full detailsANSED AUTOplus 5 Vehicle Exhaust Gas Analyzer [Discontinued]
AnsedFeatures: Discontinued: See the new Kane-EGA5 Exhaust Gas Analyzer & Printer here. Detect problems too marginal to be detected by an onboard...
View full detailsHubitools Low Pressure Schrader Connector Adapter M8x100 For HU35025
HubitoolsThe Hubitools Low Pressure Schrader Connector Adapter M8x100 For HU35025 will allow for fuel low-pressure testing of engines using Schrader-type co...
View full detailsHubitools Cooling System Adapter Tester For HU35025
HubitoolsFeatures: Can be used either along with the other T adapters already included in the HU35025 Universal Digital Pressure Tester or alone (with the ...
View full detailsHubitools Low Pressure Schrader Connector Adapter 7/16" X20Unf For HU35025
HubitoolsThe Hubitools Low Pressure Schrader Connector Adapter 7/16" X20Unf For HU35025 will allow for fuel low-pressure testing of engines using Schrader-t...
View full detailsHubitools Low Pressure Schrader Connector Adapter 8v1 For HU35025
HubitoolsThe Hubitools Low Pressure Schrader Connector Adapter 8v1 For HU35025 will allow for fuel low-pressure testing of engines using Schrader-type conne...
View full detailsHubitools Adapter Mityvac 2.0 For HU35025
HubitoolsThe Hubitools Adapter Mityvac 2.0 For HU35025 allows the technician to use the MITYVAC pump to get the electronic precision of 0.01 Bar while gener...
View full detailsHubitools Gasoline High Pressure Adapter Kit for HU35025
HubitoolsFeatures: This Kit allows using the 0-300bars sensor included in the HU35025 Universal Digital Pressure Tester, to test the Gasoline High pressure...
View full detailsMemoBike 6050 Motorcycle Powersports Diagnostic Tuning Scan Tool
ANSEDImportant: The Ansed Motorscan MS6050R17 is now the MemoBike 6050 (model MS6050R23). Most features are the same PLUS the MemoBike 6050 includes un...
View full detailsKukko 129-1 Ball Joint Removal Tool (22mm Opening)
KukkoHighlights: Made in Germany Perfect for: Pressing out ball studs when removing ball joints Pressing out tie rod knobs on tie rods. Cars and li...
View full detailsKukko 145-3 Strut Spreader Tool (M12)
KukkoHighlights: Made in Germany For: Expanding the mounting slot on a steering knuckle, allowing for removal and installation of struts. Reduces the ...
View full detailsKukko 145-2 Strut Spreader Tool (M10)
KukkoHighlights: Made in Germany For: Expanding the mounting slot on a steering knuckle, allowing for removal and installation of struts. Reduces the ...
View full detailsKukko 104 Band Wrench
KukkoHighlights: Made in Germany For: The removal or instillation of oil filters and other cylindrical parts. Reduces the probability of damaging th...
View full detailsKukko 53-A Stud Extractor Set (6mm - 12mm Bolts)
KukkoHighlights: Made in Germany For: The removal of studs and bolts of various sizes. This kit includes 4 different extractors: 53-6, 53-8, 53-10. 53...
View full detailsKukko 53-18 Stud Extractor (18mm Bolts)
KukkoHighlights: NOTE: Picture shows a different (but similar) model. Made in Germany For: The removal of studs and bolts. Reduces the probability ...
View full detailsKukko 53-16 Stud Extractor (16mm Bolts)
KukkoHighlights: Made in Germany For: The removal of studs and bolts. Reduces the chances of damaging nearby parts & components. Can be used wit...
View full details