Kukko 15-3 Bearing Separator (30 - 150mm)

Highlights:

• Made In Germany.
• NOTE: This product must be used in conjunction with a Kukko 18-3 or 18-3-B.
• For: The removal of ball bearings, roller bearings, inner rings, gears, and more.
• Used when there's not enough space to fit traditional puller jaws. 
  

The Kukko 15-3 bearing separator is designed for removing ball bearings, roller bearings, inner rings, and gears when traditional puller jaws can't fit.

It features sharp edges for effective extraction and remains stable when secured to a pulling device. Reversing the separating jaws increases the support area, allowing for a gentler removal process. It has a separation diameter range of 30-150 mm and a total cutting edge height of 78 mm. This bearing separator tool requires a Kukko 18-3 or 18-3-B for proper use.

Made in Germany, it meets compliance standards such as REACH and RoHS. The Kukko 15-3 bearing separator is built for precision and reliability.

Features:

• The sharp edges allow for extraction where other methods are not applicable.
• Extremely stable after screwing together the separation and pulling device.
• If the separating jaws are screwed into the pulling device the other way around, the support area is enlarged and removed more gently.

Specs:

• Separation diameter (min. - max.): 30 - 150 mm (1 3/16 - 5 7/8 in)
  
• Mounting thread for tension bolt: M18x1.5
  
• Total cutting edge height: 78 mm (3 1/16 in)
  
• Cutting edge thickness at the tip: 0.5 mm (1/64 in) 
  
• Rear cutting edge thickness: 11.2 mm (7/16 in)
  
• Usable depth: 50 mm (1 15/16 in)
  
• Width across flats, hexagon socket: 32 mm (1 1/4 in)
  
• Weight: 5.3 kg (11.687 lb)
  
• Compliance: REACH, RoHS, POP, PROP65, TSCA

Works with: (SKU & Item Name)

• 18-3_extracting device
• 18-3-B_Hydraulic Puller (including mechanical spindle)