Jameson 12A-516-500M Duct Hunter Rodder (5/16" x 500', Traceable. 5' Marks)

Highlights:

• 500 ft. of 5/16 in. Traceable fiberglass rod
• With copper trace wire
• Rod marked every 5 ft. with metric markings every 1 m
• Used For:
  • Non-invasive locating and mapping of underground ducts and pipes
  • Locating sewer laterals and confirm no cross bore has occurred
  • Locating ductile iron, plastic, tile, and concrete pipe
  • Use in conduit with a 2–4 in. inside diameter
• Detectable at depths up to 10 ft. when energized with a signal transmitter and traced with a hand-held receiver
  

Features:

• 6 in. bend radius
  
• Supports full-line tracing using an electromagnetic signal
• Reduces time by helping eliminate digging and trenching
• Includes male end ferrule, pulling eye, and accessory kit attached to the frame

The Jameson 12A-516-500M Duct Hunter Rodder is a traceable fiberglass duct rod designed for non-invasive locating and mapping of underground ducts and pipes within conduit systems. It features 500 feet of 5/16-inch fiberglass rod with an integrated copper trace wire, allowing the user to locate sewer laterals, confirm no cross bore has occurred, and trace ductile iron, plastic, tile, and concrete pipe. Markings every 5 feet, along with metric markings every 1 meter, support accurate measurement and consistent tracking during operation.

The rodder is built for conduit with a 2 to 4 inch inside diameter and can be detected at depths up to 10 feet when used with a signal transmitter and hand-held receiver. A 6-inch bend radius allows the rod to navigate tighter turns while maintaining control in confined pathways. The rodding reel supports full-line tracing using an electromagnetic signal, helping reduce time spent on digging and trenching. Included components such as the male end ferrule, pulling eye, and accessory kit attached to the frame provide added convenience during setup and field use.

With overall dimensions of 39 by 32 by 18 inches, this unit offers a compact and manageable profile while maintaining reliable reach and traceability. Its 500-foot length and 5/16-inch diameter make it well suited for crews working in narrower conduit systems requiring flexibility and precision. For applications that involve controlled routing and efficient underground locating, The Jameson 12A-516-500M Duct Hunter Rodder delivers a great solution.

Specifications:

• Part Number: 12A-516-500M
• Rod Length: 500 ft. (152.4 m)
• Rod Diameter: 5/16-inch (7.93 mm)
• Rod Material: Fiberglass with copper trace wire
• Detection Distance: 10 ft (3.04 m)
• Bend Radius: 6″ (152.4 mm)
• Ideal for Conduit: With Inside Diameter 2 - 4 inch (50.8 to 101.6 mm)
• Included: Accessory Kit
• Dimensions: 39″ x 32″ x 18″ (990.6 mm x 812.8 mm x 457.2 mm)