Jameson 13-716-800M Duct Hunter Rodder (7/16" x 800', Traceable. 5' Marks)

Highlights:

• 800 ft. of 7/16 in. Traceable fiberglass rod
• With copper trace wire
• Rod marked every 5 ft. with metric markings every 1 m
• Used For:
  • Non-invasive locating and mapping of underground ducts and pipes
  • Locating sewer laterals and confirm no cross bore has occurred
  • Locating ductile iron, plastic, tile, and concrete pipe
  • Use in conduit with a 4 in. or larger diameter
• Detectable at depths up to 10 ft. when energized with a signal transmitter and traced with a hand-held receiver
  

Features:

• 9 in. bend radius
  
• Supports full-line tracing using an electromagnetic signal
• Reduces time by helping eliminate digging and trenching
• Includes male end ferrule, pulling eye, and accessory kit attached to the frame

The Jameson 13-716-800M Duct Hunter Rodder is a traceable fiberglass duct rod built for non-invasive locating and mapping of underground ducts and pipes in larger conduit systems. It includes 800 feet of 7/16-inch fiberglass rod with an integrated copper trace wire, giving you a practical way to identify sewer laterals, confirm no cross bore has occurred, and trace ductile iron, plastic, tile, and concrete pipe. Clear markings every 5 feet, along with metric markings every 1 meter, help support more accurate progress tracking during field work.

The rodder is designed for use in conduit with a 4-inch or larger inside diameter and can be detected at depths up to 10 feet when energized with a signal transmitter and traced with a hand-held receiver. A 9-inch bend radius helps it move through the run while maintaining control in the line. The rodding reel supports full-line tracing through an electromagnetic signal, helping reduce time spent on exploratory digging and trenching. A male end ferrule, pulling eye, and attached accessory kit on the frame add convenience for setup and routine jobsite use.

Built with a durable frame and measuring 47.5 by 44 by 20 inches, this unit combines reach, traceability, and field-ready accessories in one organized system. Its 800-foot length and 7/16-inch diameter make it well suited for crews handling underground utility locating, duct verification, and pipe path confirmation in larger pathways. For teams that need long-distance tracing with clear markings and added detection capability, The Jameson 13-716-800M Duct Hunter Rodder delivers a practical solution.

Specifications:

• Part Number: 13-716-800M
• Rod Length: 800 ft (243.84 m)
• Rod Diameter: 7/16-inch (11.11 mm)
• Rod Material: Fiberglass with copper trace wire
• Detection Distance: 10 ft (3.04 m)
• Bend Radius: 9" (228.6 mm)
• Ideal for Conduit: With inside diameter 4 inch or larger (101.6 mm or larger)
• Included: Accessory Kit
• Dimensions: 47.5″ x 44″ x 20″ (1207 x 1118 x 508 mm)