Kukko K-70-C PULLPO Ball Bearing Puller (10mm - 100mm ID)

Highlights:

• Made In Germany.
• This set is a combination of the K-70-A and K-70-B sets.
• PULLPO: The special cross-beam shape enables safe and easy mounting and automatic clamping of the jaws via leverage transmission.
  

The Kukko K-70-C PULLPO ball bearing puller combines the capabilities of the K-70-A and K-70-B sets, offering a versatile solution for removing deep groove ball bearings without disassembling the shaft. Made in Germany, this ball bearing puller tool features a specialized cross-beam design that ensures secure mounting while automatically clamping the jaws via leverage transmission. It is ideal for extracting bearings that are seated on both a shaft and in a casing, allowing for efficient and damage-free removal.

This deep groove ball bearing puller includes specially developed pulling jaws that provide optimal support and extension force. The tempered two-part jaws are reinforced with a hammered dowel pin for stability, while color-coded versions simplify selection. Machined lateral surfaces ensure precise jaw alignment with the cross-beam, and integrated magnets make positioning support rings easier. It features a mechanical pressure spindle with a milled thread and special coating for enhanced durability. The rounded spindle head is compatible with a slide hammer for non-contact removal, expanding its range of applications.

Designed for broad compatibility, the Kukko K-70-C PULLPO supports ISO ball bearings 6000-6020, 6200-6212, 6300-6311, and 6403-6408, accommodating inner diameters from 10 mm to 100 mm and outer diameters from 26 mm to 150 mm. It includes multiple counter-pressure pads for enhanced support and comes securely stored in custom foam for organization and protection. The Kukko K-70-C PULLPO Ball Bearing Puller is a dependable tool built for professional bearing extraction.

Features:

• With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed.
• Puller is self-tensioning and easy to handle.
• Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.
• Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.
• The proven KUKKO claw in a newly developed, modern jaw design.
• The two pulling jaw versions are color-coded for easier distinction.
• The pulling jaws are tempered for a long service life.
• The special cross-beam design ensures secure retention of the the part to be removed by the pulling jaws thanks to the spread adjuster.
• Mechanical pressure spindle.
• Rounded spindle head is used with the slide hammer as a spindle top.
• Milled thread treated with special coating.
• Instructions and conversion table in the cover.
• Secure storage in special foam.

Kukko Advantage:

• Puller is self-tensioning and easy to handle.
• Simple, self-explanatory use with a small number of individual components.
• Simple mounting of the pulling jaws with 90° rotation in the cross-beam.
• Secure, form-fitting connection of the pulling jaws with the cross-beam.
• Only two pulling jaw types required.
• Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.
• Magnets under the cross-beam ensure simple mounting of the support rings on the ball bearing.
• Spindle head band prevents the wrench from slipping off.
• Non-contact removal possible - in combination with a slide hammer.

Specs:

• Ball bearing ISO: 6000-6020; 6200-6212; 6300-6311; 6403-6408
• Inner diameter of ball bearing: 10 - 100 mm (3/8 - 3 7/8 inch)
• Outer diameter of ball bearing: 26 - 150 mm (1 1/32 - 5 7/8 inch)
• Hexagon drive (male): 13; 17 mm
• K-70 jaw length: 70; 156 mm (2 3/4; 6 3/16 inch)
• Number of rings: 13 St. / pcs.
  
• Number of jaws: 14
  
• Diameter of support ring: 19 - 77,5 mm (3/4 - 3 1/16 inch)
• Counter-pressure pad for extraction of ball bearing with hollow shaft: 10 - 42 mm (3/8 - 1 5/8 inch)
• Number of counter-pressure pads: 4 St. / pcs.
  
• Diameter of counter-pressure pads: 35 - 80 mm (1 3/8 - 3 3/16 inch)
• Weight 7.125 kg

What's included: (SKU and Item Name)

• 70-01-T Cross-beam
• 70-02-T Cross-beam
• 70-011 3 narrow replacement jaws without rings
• 70-012 3 wide replacement jaws without rings
• 70-021 4 narrow replacement jaws without rings
• 70-022 4 wide replacement jaws without rings
• 610120 Spindle
• 614242 Spindle
• 70-01-R Complete ring set
• 70-02-R Complete ring set
• 700117 Small pressure pads
• 700217 Large pressure pads
• 70-021-S 4 narrow replacement jaws with rings (red)

Videos:

K-70-C Ball Bearing Puller Set - Unboxing and Usage

Downloads:

Download the Kukko K-70-C data sheet here.