Vehicle Maintenance
Filters
- AUTOplus4 & AUTOplus5 Accessory (1)
- AUTOplus 5 Accessory (8)
- Ball joint press (3)
- Band Wrench (1)
- Bearing Splitter (2)
- Diagnostic Scanners (13)
- Diagnostic Tool (2)
- Diesel Tools (3)
- EGA1 Accessory (3)
- EGA5 & EGA1 Accessory (5)
- EGA5, EGA1, & AUTOplus5 Accessory (10)
- EGA5 Accessory (2)
- Exhaust Gas Analyzer (8)
- Fluid Extractor (1)
- Fuel Injector Puller (1)
- Gear Puller (2)
- Motorcycle / Powersports Scanner (15)
- Slide Hammer Puller (1)
- Strut Spreader Tool (2)
- Stud Extractor (6)
- Suspension Tool (1)
- Valve Synchronization (1)
- Vehicle Pressure Tester (1)
- Vehicle Pressure Tester Accessory (3)
- Video Scope (6)
- Wrench Set (1)
Kukko 53-14 Stud Extractor (14mm Bolts)
KukkoHighlights: NOTE: Picture shows a different (but similar) model. Made in Germany For: The removal of studs and bolts. Reduces the probability ...
View full detailsKukko 53-12 Stud Extractor (12mm Bolts)
KukkoHighlights: Made in Germany For: The removal of studs and bolts. Reduces the probability of damaging surrounding parts. Can be used with a ratc...
View full detailsKukko 53-10 Stud Extractor (10mm Bolts)
KukkoHighlights: Made in Germany For: The removal of studs and bolts. Reduces the probability of damaging surrounding parts. Can be used with a ratc...
View full detailsKukko 128-60-H Hydraulic Ball Joint Press (55mm Opening)
KukkoHighlights: Made in Germany Perfect for: Pressing out ball pins when removing ball joints pressing out tie rod ends on tie rods. Reduces the...
View full detailsKukko 128-50-H Hydraulic Ball Joint Press (46mm Opening)
KukkoHighlights: Made in Germany Perfect for: Pressing out ball pins when removing ball joints pressing out tie rod ends on tie rods. Reduces the...
View full detailsCTA Tools 4326 Oil Filter Wrench Set
CTA ToolsFeatures: 6-piece oil filter wrench set with secure magnetic stand Stand includes a magnetic bottom for secure placement on metal surfaces anywher...
View full detailsCTA Tools 8090 Slide Hammer and Puller set
CTA ToolsFeatures: Remove bearings, gears, bushings, seals, grease retainers, etc. The CTA Tools 8090 Slide Hammer and Puller set ensures the safe and eff...
View full detailsCTA Tools 8650 Wheel Bearing Kit
CTA ToolsFeatures: Master kit services Rear Wheel Hubs & Bearings on European vehicles, plus Front Wheel Hubs & Bearings on US, Asian & ...
View full detailsCTA Tools 8057 3 Jaw Puller - 14"
CTA ToolsFeatures: Spread: 14" (356mm) Reach: 11" (279mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) The CTA Tools 8057 3 Jaw Puller is a precis...
View full detailsCTA Tools 8059 3 Jaw Puller - 17"
CTA ToolsFeatures: Spread: 17" (432mm) Reach: 15" (381mm) Screw Length: 13" (330mm) Capacity: 13 tons (11.8MT) The CTA Tools 8059 3 Jaw Puller is a heavy-...
View full detailsCTA Tools 7808 Injector Puller
CTA ToolsFeatures: Removes frozen or caked injectors without removing the electrical part Services older and late model vehicles, including Denso, Siemens,...
View full detailsCTA Tools 6510 Pneumatic Fluid Extractor
CTA ToolsFeatures: 15L (4 Gallon) extra-large capacity tank services passenger vehicles, pick-up trucks and light duty trucks with large engines Now includ...
View full detailsCTA Tools 8155 Bearing Separator
CTA ToolsFeatures: Remove generator gears, bearings, bearing cones and similar parts where ordinary puller jaws will not reach Services Heavy Duty applicat...
View full detailsCTA Tools 8995 Bearing Splitter Set
CTA ToolsFeatures: Set contains 4 bearing splitters and 1 V-Belt Pulley Pulling attachment tool Use to remove bearings, races, and seals from axles, wheel ...
View full detailsCTA Tools 9376 Radiator Pressure Tester Kit
CTA ToolsFeatures: Designed for testing radiator system pressure on a wide-range of car, truck and agriculture-equipment applications, but not limited to I...
View full detailsCTA Tools 7912 Turbo Leak Tester
CTA ToolsFeatures: The turbo system leakage tester helps locate air leaks in the components by plugging the output side of the turbo and plugging the intak...
View full detailsCTA Tools 7730 Glow Plug Thread Repair Kit
CTA ToolsFeatures: Kit is designed to repair glow plug housing threads for a wide range of diesel engines It professionally and permanently replaces the th...
View full detailsCTA Tools 7806 Fuel Injector Seal Tool
CTA ToolsFeatures: Removes clogged or stuck diesel injector seals. 1 Kg (2.2 lbs) slide hammer removes the most difficult seals. Slide hammer designed with...
View full detailsCTA Tools 7804 Glow Plug Removal Tool
CTA ToolsFeatures: Removes damaged glow plugs, even when compartment is not easily accessible Easy removal in narrow engine bays and engines with glow plug...
View full detailsHubitools Diesel Glow Plug Compression Adaptor
HubitoolsFeatures: Works with the Hubitools HU35025 pressure tester. Universal false glow plug adapters are installed in place of the OEM glow plug to perf...
View full detailsHubitools Universal T Adaptors (for HU35025)
HubitoolsFeatures: Works with the Hubitools HU35025 pressure tester. Two (2) piece kit includes brass adapters fitting flexible lines from 6mm to 15mm I.D....
View full detailsHubitools Cylinder Leakage Tester (For HU35025)
HubitoolsFeatures: Works with the Hubitools HU35025 pressure tester OR Can connect to the included pressure gauge for stand-alone use. Test and record eac...
View full detailsHubitools Engine & Turbo Oil Pressure Adapters Set (For HU35025)
HubitoolsFeatures: Works with the Hubitools HU35025 pressure tester. Includes 14 universal brass adapters. The adapters easily replace oil & turbo se...
View full detailsKane Water Stop Filters for the EGA5 (10 Pack)
KaneThese water stop filters work with the Kane EGA5, EGA5/PR