Bethlehem Burners Resource Center

The purpose of the Bethlehem Resource Center is to provide any additional info you may need, and offer instructions for various Bethlehem Products.

TORCH CLEANING:

Helpful Tips For Your Bethlehem Torch / Cleaning Instructions

OPERATING INSTRUCTIONS:

TECHNICAL INFO:

Fuel Consumption:

Bethlehem’s Surface-Mixed Burners

Listed below are the fuel consumption data for the Bethlehem Burners. All burners were set at the maximum flame setting that yields the hottest flame without distorting the solid blue feature of the Bethlehem flame. The numbers are expressed in Liters Per Minute (LPM). The fuel used for the Alpha and Bravo burners was propane gas that was regulated by approximately 2 pounds per square inch (psi). The oxygen was delivered from a compressed gas cylinder with a regulator and set for approximately 8psi. The fuel used for the Champion and Grand burners was Propane gas that was regulated by approximately 5 pounds per square inch (psi). The oxygen was delivered from a compressed gas cylinder and set for approximately 20psi. Burner flames used for soft glass will not require as much heat as a flame for hard or borosilicate glass. All Bethlehem Burners can work both soft and borosilicate glass.

More technical information about our torches can be found here. If you’re using an Oxygen Concentrator with your Bethlehem Burner this document will also prove useful.