Skip to content
FREE Shipping from the USA. | Most orders ship within 24 hours.
FREE Shipping from the USA. | Most orders ship within 24 hours.

Kukko 20-3-B 2 arm Hydraulic Bearing Puller (65 - 250mm)

by Kukko
SKU 20-3-B
Save 7% Save 7%
Original price $1,085.80
Original price $1,085.80 - Original price $1,085.80
Original price $1,085.80
Current price $1,011.50
$1,011.50 - $1,011.50
Current price $1,011.50


  • IMPORTANT: This is a generic picture of a similar (smaller) model. Please check the specs for item details.
  • Made In Germany.
  • ARMLOCK: The cross-legged jaws guarantee maximum stability for suspending the jaws in the slider.
  • GLIDE & FIX: The improved geometry guarantees quick and easy movement of the jaws on the cross-beam.
  • HYDRAULIC: Pullers with hydraulic function.
  • SWITCH: A two-sided spindle tip provides optimal adjustment of the spindle to the shaft.

Make removing extremely tight bearings, gears, and discs much easier with the Kukko 65 - 250mm 2 arm Hydraulic Bearing Puller. It uses a grease hydraulic spindle and a mechanical pressure screw. This allows the user to operate the puller with non-powered hand tools.


    • Grease hydraulics.
    • Standard pulling hook.
    • Parallel pulling hooks in every position, even with full load.
    • Pulling hooks with infinitely variable adjustment on the cross-beam.
    • Hydraulic and mechanical pressure screw.
    • Milled thread treated with special coating.
    • Two-arm design for space-saving operation.

      Kukko Advantage:

        • Easy and even pulling for particularly tight parts.
        • Variable reach thanks to jaw extensions, available up to a puller size of -30.
        • Optional conversion to various jaw types for mechanical use.
        • Turning the pulling hooks enables them to be used both internally and externally.
        • Suitable for pulling asymmetric workpieces.
        • Spindle head band prevents the wrench from slipping off.
        • Cross-beam, up to size -30, includes hexagonal profile for holding.
        • Almost all components available as replacement parts, time-saving order process thanks to numbering system.
        • Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
        • Quality made in Germany.
        • Strong design, high performance and long service life.
        • Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
        • Safety label to ensure protection of intellectual property.
        • A tube of KUKKO special grease included for pressure spindle.
        • Product video on the product can be opened.


              • Spread: 65 - 250 mm (2 5/8 - 9 7/8 inch)
              • Depth: 200 mm (7 7/8 inch)
              • Spread used internal: 180 - 340 mm (7 1/8 - 13 3/8 inch)
              • Hexagon drive (male): 12; 27 mm
              • Maximum load: 10 t (11 US t)
              • Weight: 9.525 kg
              • Space below: 20 mm (3/4 inch)
              • Space next to it: 67 mm (2 5/8 inch)
              • Number of jaws: 2

                  Safety & Operating Info:

                  • The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
                  • If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
                  • The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
                  • Observe max. torque.
                  • Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
                  • Protective blanket required.
                  • Protective goggles required.

                  What's included: (SKU and Item Name)

                      • 8-02 Long hydraulic spindle
                      • 3-200-P 2 pulling jaws (pair)
                      • 20-3-T 2-jaw cross bar


                          Download the Kukko 20-3-B data sheet here.

                          Item Location & Shipping

                          -Ships from the USA.

                          -Most orders processed within 24 hours.

                          -Average transit time is 3 business days.

                          -We ship with either USPS, UPS or FedEx.

                          -Want to double check? Just ask! Contact us here.

                          Questions & Answers

                          Have a Question?

                          Be the first to ask a question about this.

                          Ask a Question