Kukko 20-4-AV 2 arm Bearing Puller (80 - 520mm)

• Made In Germany.
• For removing large bearings, gears, discs, etc.
• SWITCH: A two-sided spindle tip provides optimal adjustment of the spindle to the shaft.
  

If you need to remove larger bearings, gears, discs you're going to want the Kukko 80 - 520mm 2 arm Bearing Puller. It has the size you need, and the strength you'll want to get the job done.

Features:

• High performance.
• Standard pulling hooks with adjustable depths.
• Parallel pulling hooks in every position, even with full load.
• Pulling hooks with infinitely variable adjustment on the cross-beam.
• Mechanical pressure screw.
• Milled thread treated with special coating.
• Two-arm design for space-saving operation.

Kukko Advantage:

• Pulling hooks can be adjusted lengthwise to meet the required clamping depths.
• Turning the pulling hooks enables them to be used both internally and externally.
• Suitable for pulling asymmetric workpieces.
• Spindle head band prevents the wrench from slipping off.
• Almost all components available as replacement parts, time-saving order process thanks to numbering system.
• Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option.
• Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
• Quality made in Germany.
• Strong design, high performance and long service life.
• Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
• Safety label to ensure protection of intellectual property.
• A tube of KUKKO special grease included for pressure spindle.

Specs:

• Spread: 80 - 520 mm (3 3/16 - 20 1/2 inch)
• Depth: 300 - 500 mm (11 7/8 - 19 3/4 inch)
• Spread used internal: 200 - 590 mm (7 7/8 - 23 inch)
• Hexagon drive: (male) 36 mm
• Maximum load: 12 t (12 US t)
• Maximum torque: 400 Nm (295 ft lb)
• Weight: 20.74 kg
• Space below: 25 mm (1 inch)
• Space next to it: 85 mm (3 3/8 inch)
• Number of jaws: 2
  

What's included: (SKU and Item Name)

• 633500 Mechanical pressure spindle.
• 4-SP-P 2 pulling jaws with adjustable length (pair)
• 20-4-T 2-jaw cross bar

Download the Kukko 20-4-AV data sheet here.