ANSED AUTOplus 5 Vehicle Exhaust Gas Emissions Diagnostic Analyzer Scanner Tool Kit
Features:
- Detect problems too marginal to be detected by an onboard computer or a scan tool.
- Interprets the exhaust gases and their interactions.
- Provides a top-down list of suggested problems and solutions in order of probability.
- Reduce diagnostic time, verify repairs are complete, reduce comebacks, and increase overall profitability and customer satisfaction.
- Tests HC, O2, CO, CO2, NOX and Lambda.
- Readings are LIVE, not calculated.
- Self-calibrating, no cal-gas required.
- Dyno not required for NOX testing.
- Completely portable.
- Low cost to operate and maintain.
- Operates off internal rechargeable battery.
- Water trap and filter visible.
- QVGA Display: Large (3 x 2.2”) and easy to read all gases and Lambda on one screen, no scrolling
- Ergonomic Design Keypad: Simple and easy to navigate and use.
- Bluetooth or USB Cable ready: Links analyzer easily to PC to use with KANE LIVE Graphing Software
- Variable Pump Speed: Allows for adjustment of the pump speed, which can then improve battery life
- Optional Hi-Speed Print Capability: Use with the KMIRP2 hi-speed printer with rechargeable battery (Sold Separately)
- Probe: Equipped with the EPAUTO7 Hi-Temperature Probe, with Neoprene tubing.
If you need a way to quickly and easily diagnose vehicle issues through exhaust gas then the ANSED AUTOplus 5 Vehicle Exhaust Gas Emissions Diagnostic Analyzer Scanner Tool Kit is going to be perfect for you. It can identify issues that most scanners and onboard computers cant, and even offers suggestions on how to repair these issues.
Technical Specifications:
|
Parameter |
Resolution |
Accuracy |
Range |
|
Carbon Monoxide (Infrared) |
0.01 % |
+/- 5 % of reading *1 +/- 0.06 % volume *1 |
0-10 % Over-range 20 % |
|
Oxygen (fuel cell) |
0.01 % |
+/- 5 % of reading*1 +/- 0.1 % volume *1 |
0-21 % Over-range 25 % |
|
Hydrocarbon (Infrared) |
1 ppm |
+/- 5 % of reading *1 +/- 12 ppm volume *1 |
0-5000 ppm Over-range: 10,000 ppm |
|
Carbon Dioxide (Infrared)) |
0.1 % |
+/- 5 % of reading *1 +/- 0.5 % volume *1 |
0-16 % Over-range: 25% |
|
Nitric Oxide*² (fuel cell) |
1 ppm |
0-1500ppm +/-5% or 25ppm; |
0-1500ppm Over-range: 5000 ppm |
|
Carbon Monoxide Corrected COK |
0.01% |
Calculated |
0-15% |
|
Lambda AFR (Petrol) (LPG) |
0.001 00.01 |
|
0.8 – 1.2 11.76 – 17.64 12.48 – 18.72 |
|
Sensor response T95 |
Nominal 20 seconds AUTOplus5 |
|
Warm up |
Less than 2 minutes |
|
Pre-programmed Fuels |
Petrol/Gasoline, LPG Diesel and CNG. |
|
PC connection |
Via RS 232 port |
|
Data-Logging |
500 Tests |
|
Dimensions Weight Handset Probe |
1kg (2.2 pounds) 220mm x 55mm x 120mm (8.7 x 2.2 x 4.7”) Insertion depth 350mm x Diameter 15mm Clip handle to secure to exhaust, 4m long hose Various probes available including high temperature |
|
Ambient Operating Range |
+5°C to +45°C/10% to 90% RH noncondensing |
|
Storage temperature |
Minimum: 0°C Maximum: +50°C |
|
Battery Charger |
Input: 100-240 V ~ 47-63 Hz Output: 12 V DC |
|
Analyzer battery run time |
4+ hours from full charge with the pump running, 8+ hours with pump off. To charge, 6-8 hours. |
ANSED Exhaust Gas Diagnostic Software:
- Interprets the exhaust gas analyzer readings in seconds!
- Uses a floating matrix formula for each gas reading, coupled with other diagnostic variables, to enhance the accuracy.
- Several possible solutions, in order of probability, are suggested with the first one the likely cause in 80% of the situations.
- Diagnose no-code drivability & performance issues
- Ensure catalytic converter related repairs are complete
- Print test results reports: pre- and post-repair
- Verify vehicle running at max efficiency after repairs and prevent comebacks
- Easy-to-read PASS/FAIL report.
- Pre-repair reports provide initial gas analysis for review.
- Customer Report offers a “customer friendly analysis” of the exhaust diagnostic test.
- Technician Report details the diagnostic test results and suggested procedures.
- Post-repair report verifies that repairs have been completed and the vehicle is running at maximum efficiency.
- All reports can be printed or saved for future reference.
KANE LIVE Graphing Software:
- Is a great way to connect to the AUTOplus5 Gas Analyzer to view gas exhaust readings, all in "real-time” on your PC via Bluetooth™ or USB Cable.
- Data is viewed either digitally or in graph form so you can easily track parameters over time as they change.
- If required, the live data can be saved and stored on your PC. The software also allows for printing.
- Monitor individual exhaust gas readings digitally on a larger PC screen.
- Graphically display individual gas readings over time.
- Check individual exhaust gas readings for dropouts, spikes or irregularities in graphing mode.
- Save all information to PC for future reference.
What's Included?
- KANE AUTOplus5 Gas Analyzer
- EPAUTO7 Hi-Temp Probe
- AC Charger
- 12V DC Charger
- Five (5) Replacement Filters
- User Manual & Quick Start Guide
- ANSED Exhaust Gas Diagnostics Software (FREE)
- KANE Live Graphing Software (FREE)
- CL5 USB Cable
- Shoulder Bag
Video:
Need more info? Please contact us or go to the Ansed Resource Center.
Item Location & Shipping
-Ships from the USA.
-Most orders processed within 24 hours.
-Average transit time is 3 business days.
-We ship with either USPS, UPS or FedEx.
-Want to double check? Just ask! Contact us here.
Questions & Answers
Have a Question?
-
Do you offer military discount?
Hello, Yes we do, however it depends on the item and current discount level on that item. You can reach out to someone in sales here https://shopenasupply.com/pages/contact and they will be able to give you more info. Hope this helps!