ANSED AUTOplus 5 Vehicle Exhaust Gas Emissions Diagnostic Analyzer Scanner Tool Kit W Printer
Features:
- Detect problems too marginal to be detected by an onboard computer or a scan tool.
- Interprets the exhaust gases and their interactions.
- Provides a top-down list of suggested problems and solutions in order of probability.
- Reduce diagnostic time, verify repairs are complete, reduce comebacks, and increase overall profitability and customer satisfaction.
- Tests HC, O2, CO, CO2, NOX and Lambda.
- Readings are LIVE, not calculated.
- Self-calibrating, no cal-gas required.
- Dyno not required for NOX testing.
- Completely portable.
- Low cost to operate and maintain.
- Operates off internal rechargeable battery.
- Water trap and filter visible.
- QVGA Display: Large (3 x 2.2”) and easy to read all gases and Lambda on one screen, no scrolling
- Ergonomic Design Keypad: Simple and easy to navigate and use.
- Bluetooth or USB Cable ready: Links analyzer easily to PC to use with KANE LIVE Graphing Software
- Variable Pump Speed: Allows for adjustment of the pump speed, which can then improve battery life
- Optional Hi-Speed Print Capability: Use with the KMIRP2 hi-speed printer with rechargeable battery
- Probe: Equipped with the EPAUTO7 Hi-Temperature Probe, with Neoprene tubing.
If you need a way to quickly and easily diagnose vehicle issues through exhaust gas then the ANSED AUTOplus 5 Vehicle Exhaust Gas Emissions Diagnostic Analyzer Scanner Tool Kit W Printer is going to be perfect for you. It identifies issues that most scanners and onboard computers cant, and even offers suggestions on how to repair these issues.
Technical Specifications:
|
Parameter |
Resolution |
Accuracy |
Range |
|
Carbon Monoxide (Infrared) |
0.01 % |
+/- 5 % of reading *1 +/- 0.06 % volume *1 |
0-10 % Over-range 20 % |
|
Oxygen (fuel cell) |
0.01 % |
+/- 5 % of reading*1 +/- 0.1 % volume *1 |
0-21 % Over-range 25 % |
|
Hydrocarbon (Infrared) |
1 ppm |
+/- 5 % of reading *1 +/- 12 ppm volume *1 |
0-5000 ppm Over-range: 10,000 ppm |
|
Carbon Dioxide (Infrared)) |
0.1 % |
+/- 5 % of reading *1 +/- 0.5 % volume *1 |
0-16 % Over-range: 25% |
|
Nitric Oxide*² (fuel cell) |
1 ppm |
0-1500ppm +/-5% or 25ppm; |
0-1500ppm Over-range: 5000 ppm |
|
Carbon Monoxide Corrected COK |
0.01% |
Calculated |
0-15% |
|
Lambda AFR (Petrol) (LPG) |
0.001 00.01 |
|
0.8 – 1.2 11.76 – 17.64 12.48 – 18.72 |
|
Sensor response T95 |
Nominal 20 seconds AUTOplus5 |
|
Warm up |
Less than 2 minutes |
|
Pre-programmed Fuels |
Petrol/Gasoline, LPG Diesel and CNG. |
|
PC connection |
Via RS 232 port |
|
Data-Logging |
500 Tests |
|
Dimensions Weight Handset Probe |
1kg (2.2 pounds) 220mm x 55mm x 120mm (8.7 x 2.2 x 4.7”) Insertion depth 350mm x Diameter 15mm Clip handle to secure to exhaust, 4m long hose Various probes available including high temperature |
|
Ambient Operating Range |
+5°C to +45°C/10% to 90% RH noncondensing |
|
Storage temperature |
Minimum: 0°C Maximum: +50°C |
|
Battery Charger |
Input: 100-240 V ~ 47-63 Hz Output: 12 V DC |
|
Analyzer battery run time |
4+ hours from full charge with the pump running, 8+ hours with pump off. To charge, 6-8 hours. |
ANSED Exhaust Gas Diagnostic Software:
- Interprets the exhaust gas analyzer readings in seconds!
- Uses a floating matrix formula for each gas reading, coupled with other diagnostic variables, to enhance the accuracy.
- Several possible solutions, in order of probability, are suggested with the first one the likely cause in 80% of the situations.
- Diagnose no-code drivability & performance issues
- Ensure catalytic converter related repairs are complete
- Print test results reports: pre- and post-repair
- Verify vehicle running at max efficiency after repairs and prevent comebacks
- Easy-to-read PASS/FAIL report.
- Pre-repair reports provide initial gas analysis for review.
- Customer Report offers a “customer friendly analysis” of the exhaust diagnostic test.
- Technician Report details the diagnostic test results and suggested procedures.
- Post-repair report verifies that repairs have been completed and the vehicle is running at maximum efficiency.
- All reports can be printed or saved for future reference.
KANE LIVE Graphing Software:
- Is a great way to connect to the AUTOplus5 Gas Analyzer to view gas exhaust readings, all in "real-time” on your PC via Bluetooth™ or USB Cable.
- Data is viewed either digitally or in graph form so you can easily track parameters over time as they change.
- If required, the live data can be saved and stored on your PC. The software also allows for printing.
- Monitor individual exhaust gas readings digitally on a larger PC screen.
- Graphically display individual gas readings over time.
- Check individual exhaust gas readings for dropouts, spikes or irregularities in graphing mode.
- Save all information to PC for future reference.
What's Included?
- KANE AUTOplus5 Gas Analyzer
- EPAUTO7 Hi-Temp Probe
- KMIRP2 Hi-Speed Printer
- AC Charger
- 12V DC Charger
- Five (5) Replacement Filters
- User Manual & Quick Start Guide
- ANSED Exhaust Gas Diagnostics Software (FREE)
- KANE Live Graphing Software (FREE)
- CL5 USB Cable
- Shoulder Bag
Video:
Need more info? Please contact us or go to the Ansed Resource Center.
Item Location & Shipping
-Ships from the USA.
-Most orders processed within 24 hours.
-Average transit time is 3 business days.
-We ship with either USPS, UPS or FedEx.
-Want to double check? Just ask! Contact us here.
Questions & Answers
Have a Question?
Be the first to ask a question about this.